28
3.
Click “OK” to save.
Important: The FTP upload only will activate when the alarm event is detected, such as motion detection,
external alarm detection. The camera can not continuous upload the snapshot to a ftp server.
Enable the on-board storage recording
1. In the "Main"
,
Enter “Device Config”, Click “Record Config”
2. Select the auto, make sure the detect is checked. Click OK to save.
Enable on Motion detection.
1. In the "Main"
,
Enter the “Device Config”, Click icon “Video Detect”, enter a new interface.
Summary of Contents for 2252-23
Page 53: ...53...
