21
NOTE:
Check “General” will keep camera recording continuously. Unchecked the “General”, the
camera will only record the footage when the motion or alarm input is detected. It can save the hard
driver space.
Enable Motion recording
1. In the "Main"
, Click “Device Config” , enter “Video Detect”, a new screen appear.
2. Click the enable to turn on the motion detection.
3.
Choose sensitivity level from “Sensitivity”.
Important: Over sensitivity could cause much more false alarm.
3.
Click the “Region”, Mark the interested area with blue block.
NOTE: The blue block is selected area.
4. Click Period, a new dialog pop up. Customize the schedule to activate the motion detection,
click OK to save.
Summary of Contents for 2252-23
Page 53: ...53...
