goki SmartProducts G1, Manual

Page: 7 / 14

Manual
6.Edit user passcode
Input [*10#original passcode#new passcode#new passcode#] on the keypad to
edit passcodes. A long beep indicates editing successful and 4 short beeps mean
editing unsuccessful.
7. Ways to set Auto Lock
A.Input [*21#Admin Passcode#Auto Lock time out(0, 5999 seconds)#] to set Auto
Lock. If“0”is set as the time out, Auto Lock is disabled. Other numbers mean the
time the lock will automatically lock after it is unlocked. The default mode of Auto
Lock is off.
B.For locks equipped with magnetic sensors, the default mode of Auto Lock is on.
Inputing [*23#Admin Passcode#0#] will disable Auto Lock feature. Inputing
[*23#Admin Passcode#1#] will activate Auto Lock feature again.
C.On the App, select the lock, press [Settings][Auto Lock] to edit the settings of
Auto Lock.
8.Low battery alert
If the battery is low, the keypad will light up and flash for a second when it’s
activated.