background image

FCC Statement:  

Any Changes or modifications not expressly approved by the party responsible  
for compliance could void the user’s authority to operate the equipment. 
This device complies with part 15 of the FCC Rules. Operation is subject to the  
following two conditions:  
(1) This device may not cause harmful interference, and   
(2) This device must accept any interference received, including interference that 
may cause undesired operation. 

FCC Radiation Exposure Statement: 

This equipment complies with FCC radiation exposure limits set forth for an  
uncontrolled environment .This equipment should be installed and operated 
with minimum distance 20cm between the radiator& your body. 

IC RSS warning:  

This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to 
the following two conditions: (1) this device may not cause interference, and (2) this device must 
accept any interference,including interference that may cause undesired operation of the device.  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio 
exempts de licence.  
L'exploitation est autorisée aux deux conditions suivantes:  
(1) l'appareil ne doit pas produire de brouillage, et  
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le 
brouillage est susceptible d'en compromettre le fonctionnement. 

IC Radiation Exposure Statement: 

 

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled 
environment. This equipment should be installed and operated with minimum distance 20cm 
between the radiator& your body.This transmitter must not be co-located or operating in 
conjunction with any other antenna or transmitter. 
Le rayonnement de la classe b repecte ISED fixaient un environnement non contrôlés.Installation 
et mise en 

œ

uvre de ce matériel devrait avec échangeur distance minimale entre 20 cm ton 

corps.Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec d’autres. 

Summary of Contents for SmartProducts G1















Reviews: