GOKARTSUSA.COM
(800)
603-1437
GokartsUSA is a Nationwide Supplier of Powersports Products
16
Install Radiator Coolant
(250 Models)
Your Buggy ships from the factory with NO coolant in the cooling
system. If anything, it is shipped with water only. BEFORE operating
your buggy, you MUST:
1.
Purchase a bottle of automotive antifreeze
2.
Remove the radiator cap from the radiator
3.
Disconnect the lower radiator hose from the radiator and
allow the water to drain from both the hose and radiator
4.
Re-attach the lower radiator hose to radiator
5.
Fill the cooling system with the same ratio of antifreeze to
water that you would use in your full-size automobile. This
ratio will vary according to the region/climate in which you
live
6.
Bleed the air from the cooling system as follows:
a.
Leave the cap OFF of the radiator
b.
Start the engine
c.
After the engine warms and the thermostat opens, an
air bubble will surface in the radiator and the coolant
level will go down
d.
Top off the cooling system so that the coolant level is
at the bottom of the radiator filler neck
e.
Replace the radiator cap on the radiator
f.
Now fill the coolant overflow tank about 1/4 full with
coolant.
WARNING:
Running the engine without the cooling system being properly filled
voids your warranty!
