Gas cylinder valve
Part No. 09 737 50
d
5 / 8
ASSEMBLY
Before assembling, check that the product is complete and has not suffered any damage
during transport.
For the system to function as intended it must be installed professionally in compliance with
the technical instructions applicable to the planning, construction and operation of the entire
system.
Malfunctions caused by residues.
Proper functioning is not guaranteed.
Visually check that there are no metal filings or residues in the connections.
It is important that metal filings or other residues are blown out.
•
Always install clean and undamaged gaskets.
•
lh – left-hand thread version.
Screw connections
If connections leak, there is a danger of explosion, fire or suffocation.
Gas may escape if the product is turned.
Do not turn the product after it has been installed and the connections have been
tightened.
Tighten connections only when they are not pressurised.
Remove the seal from the propane
cylinder
Attach the gas cylinder valve type CGV to
the propane cylinder
Connect the hose to the pressure
regulator
Attach the pressure regulator to the gas
cylinder valve type CGV
rh
lh
lh