GOK CGV Assembly And Operating Instructions Manual Download Page 10

Gas cylinder valve

 

 

2 / 8 

Part No. 09 737 50 

d

 

 

 

SAFETY ADVICE 

Your safety and the safety of others are very important. We have provided many important 

safety messages in this manual and on your appliance. 

Always read and obey all safety messages. 

This is the safety alert symbol. 

This symbol alerts you to potential hazards that can kill or hurt you and others. 

All safety messages will follow the safety alert symbol and either the word 

“DANGER”, “WARNING” or “CAUTION”. These words mean: 

describes a 

personal hazard

 with a 

high degree of risk

 

May result in

 death or serious injury

.

 

describes a 

personal hazard

 with a 

medium degree of risk

 May result in 

death or serious injury

describes a 

personal hazard

 with a 

low degree of risk

 May result in 

minor or moderate injury

 describes 

material damage

 Has an 

effect

 on ongoing operation. 

PRODUCT-RELATED SAFETY ADVICE 

Leaking LPG is extremely flammable! 

Can cause explosion. Severe burns with direct contact to skin. 

Check connections regularly for leaks! 

In case of gas smell or leakage shut-down the installation immediately! 

Keep ignition sources and electrical devices out of reach! 

Observe applicable laws and regulations! 

 The LPG cylinder must be upright when gas is being withdrawn. 

Gas is withdrawn only from the gaseous phase. 

The gas cylinder must be secured so that it cannot topple over. 

Protect gas cylinders against radiant heat or heat from heating appliances. 

Observe the installation regulations in the respective countries. 

GENERAL PRODUCT INFORMATION 

The safety cylinder valve CGV is used as a gas withdrawal valve for aluminium alloy gas 

cylinders; filled only with propane up to 2.7 kg filling weight and with a maximum 

permissible weight of 5 kg for connection to gas appliances with small cylinder regulators.

The CGV is operated manually and fulfils the requirements  

 

 

EN ISO 15995. 

The CGV also has  a safety valve in accordance with EN 13953. 

Summary of Contents for CGV

















Reviews: