Specifications
Channel: 2.0
Output Power: 2 x 15MW
Sensitivity: 89dB
Drivers: Neodymium enhanced
Connectivity: USB 2.0, AUX 3.5mm
Battery power: 2 x AAA (not included)
FCC NOTE: This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try the interference by one of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications made on the system not expressly approved by the manufacturer could void the
user’s authority to operate equipment This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful inference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
faq FAQ
1. For what possible reasons could the
(b) Audio Transmitter
fail to connect
to the
(a)2.4Ghz Headphones
?
a. Please check that the AAA batteries have power.
b. Check the position of the
(8)Mode Switch
on the
(b)Audio Transmitter
.
c. Reconnect the
(b)Audio Transmitter
and
(a)2.4Ghz Headphones
again.
2. How am I supposed to identify the meaning of each LED light indication?
- Please refer to
LED Indicator
in
Troubleshooting / Tips
for more details.
3. Why can’t I hear music from my computer after I’ve connected via USB ?
- Please restart your media player program.