Transmitter Amplification:
There is an amplifier in the Transmitter for
improved sound quality. If you are using the headphones with a computer,
make sure that you select ‘Play’ on your computer’s audio program after the
headphones have been connected to the computer.
LED Indicator:
The
(5) Transmitter Connect LED Button
will flash slowly
when it is NOT connected to the
(a) 2.4Ghz Headphones
. After holding the
‘Connect’ buttons on both the
(b) Audio Transmitter
and the
(a) 2.4Ghz
Headphones
for 5 seconds, both LED lights will begin to flash quickly. This
means that they are connected. Now, simply play an audio track.
Low Power:
When the battery is low,
(2) Power Button
on the Headphones
will flash slowly. At the same time, a notification sound will emanate from the
headphones which remind the user to replace the batteries.
Sleep Mode
: If your music player pauses or stops for more than 10 minutes
the headphones will go into Sleep Mode. Once music is played, the head-
phones will begin to receive the audio signal again.
Multiple Headphones:
One
(b) Audio Transmitter
can transmit to multiple
sets of GOgroove PurePlay Headphones at the same time. To work with mul-
tiple headphones, hold all connection buttons while pairing.
Troubleshooting / Tips