EN - 82
SyStem requiremeNt
200MHz Pentium processor or higher version
- Windows 98SE/ME/2000/XP
- Mac OS X (Support ver 9.2 or higher version)
USB port
SVGA graphic card
Memory of 64MB or above
Mouse
CD-ROM drive (X2 or faster)
HDD 100MB or more free space
Charging
Use the PC USB cable supplied with the product to connect the main body to the PC for
charging. It takes one hour and 20~30 minutes to fully charge the battery of the product.
‘Charging’ icon is displayed while charging the battery and ‘Battery icon’ is displayed to show
that the battery is fully charged.
When the battery is completely discharged, the screen display of the product may not turn on
during the initial charging.
The using time of the product and the time required to fully charge may differ by the using
condition or environment.
CoNNeCtiNg to the ComPuter
By utilizing the PC USB cable included with the product, you can charge the main unit by con
-
necting it to the PC.
Connect the USB cable to the USB port of the computer.
Connect the other side of the USB cable to the connecting terminal on the bottom.
With a message saying a new device is found, the USB driver will be installed.
The installation screen might not be shown.
Check whether it has been properly installed by checking the Device Manager.
When the USB driver is installed, you will see the in [Device Manager].
If you disconnect the USB cable while installing the USB driver initially or while executing a
command, it might cause an error in the PC.
•
•
•
•
1)
2)
3)
4)
5)
6)
7)
Summary of Contents for MXM 777 FM NIPPLE
Page 109: ...Pozn mky Notes...
Page 110: ...Pozn mky Notes...
Page 111: ...Pozn mky Notes...
Page 112: ...EN 112...
