EN
FUNCTION SETTING
Time setting
Long press the
S button
for 2 seconds, and enter the date
setting function after hearing the „tick“ sound. After entering
the setting interface, the number indicating „year“ flashes.
Adjust the number through the
UP
and
DOWN button
. After
adjustment, short press the
S button
to successively enter
the „month-day-hour/minute“ adjustment and the adjustment
method is consistent with „year“ setting. After setting, press the
S button
briefly to exit the setting mode.
NOTE: If there is no operation for 10 seconds during the setting, the
system will exit the setting.
Alarm setting
Press the
S button
once to display „oFR1“ (continue pressing
to select „oFR2“, „oFR3“, R1-R2-R3 represent three groups of
the alarm clock, „oF“ indicates that the alarm clock is off, press
the
UP button
to switch to the „onR1“ display, meanwhile, the
alarm clock starts). At the status, long press the
S button
for
2 sec to hear the „tick“ sound to enter the alarm clock setting.
First, enter the „time“ setting, adjust the number through the
UP
and
DOWN buttons
, press the
S button
again to switch to the
„minute“ setting, and press the
S button
to exit after the setting
is completed. When the alarm rings, touch any button to turn it
off. If there is no operation the sound lasts for 1 minute, it will
automatically enter into snooze mode for 10 minutes.Press any
button in the process of snooze timing to turn off snooze.After
snooze timing finishes, the alarm will ring again, then press any
button to turn off the alarm. After snooze mode 3 times, it will
turn off automatically.
Night light setting
Short press the
night light button
to turn on/off night light. After
the light is on, long press the button to adjust the lightness.
Every time turn on the light will keep the brightness of the last
time you turned it off.
Summary of Contents for DECKO SVETLO
Page 32: ...www gogen cz ...
