EN
BLUETOOTH PAIRING MODE
Turn on the headphone by holding down the power button. Keep pressing until
the LED lights flash red and blue. Release the power button after LED’s start
flashing red and blue.
CONNECTING TO A BLUETOOTH DEVICE
1. When the headphones are in pairing mode, open the wireless setting on
your device. Make sure the device’s Bluetooth setting is turned on.
2. Search for
SLECHY VRTULKA B
or
SLECHY VRTULKA R
3. Choose
SLECHY VRTULKA B
or
SLECHY VRTULKA R
pair, your device
should them show “connected”.
4. Blue LED controller on earpohones slowly blinks after the earphones are
connected to your device.
5. If your device asks you for a password to connect to the headphones, key
in “0000”. This is normally not needed.
CHARGING
Connect the provided USB-C cable to a computer or a USB charger. LED
controller shines red while charging. The controller tunrs off after being fully
charged.
LOW BATTERY
A low battery is indicated by a flashing red LED. When it is discharged, the
headphones turn off automatically. To maintain proper battery levels, charge
the headphones at least once per month. If the headphones sit without being
power on for long periods of time, they will need to be charged to maintain full
battery levels.
Summary of Contents for DECKO SLECHY DUO
Page 22: ...www gogen cz...
