Gogen BPS 733, User Manual

Page: 23 / 32

EN - 23
EN
REPEAT PLAY
You can play one track or all tracks on the USB repeatedly.
To repeat a Single Track
1. Press
P-MODE/MEM.
button on unit during play, the display will show a “ ” logo and the
current track will be played over an over again till you press the PLAY/PAUSE/PAIR/SCAN
button on unit.
2. To cancel repeat play, press P-MODE/MEM. button on unit until “ ” logo disappears from
the display.
To repeat all the Tracks
1. Press P-MODE/MEM. button on unit until the “ ALL” logo shows steadily on the display,
all tracks on the USB will be played over and over again till you press the
PLAY/PAUSE/PAIR/SCAN button on unit.
2. To cancel repeat play, press the P-MODE/MEM. button on unit until “ ALL” logo disappears
from the display.
To repeat the folder (only for USB which contains more than one folder)
1. Press the P-MODE/MEM. button on unit until “ DIR” logo show steadily on the display,
the current folder will be repeated over and over again till you press the
PLAY/PAUSE/PAIR/SCAN button on unit.
2. To cancel repeat play, press the P-MODE/MEM. button on unit until “ DIR” logo disappears
from the display.
RANDOM PLAY
Press the
P-MODE/MEM.
button on unit in play mode till the “
RAND
” shows steadily on the
display, the random play will start from next track automatically, until all tracks are played over
and then it will stop. Press the P-MODE/MEM. button on unit again until the “ RAND ” disappears
from the display to cancel.
RADIO OPERATION
TUNING RADIO STATIONS
1. Press the FUNCTION/STANDBY button on unit to select the radio mode: FM mode.
2. Tune to desired station by pressing
:
/TUN+ or
9
/TUN- button, the display will show
the band frequency. Example: FM 97.10 MHz.
3. Rotate the VOLUME knob on unit to increase or decrease volume.
4. Extend Pig Tail Antenna to its full length and gently move the unit back and forth to get
the best reception, or place the unit in an open location.
5. To turn off the radio, press the FUNCTION/STANDBY button to switch to other functions
or switch off the unit.
AUTO PRESET MEMORY / SCAN
To search for and automatically save stations to preset memory, press and hold the
PLAY/PAUSE/PAIR/SCAN button. Any station with a strong enough signal will be saved to preset
memory. After the unit finishes scanning, the unit will automatically tune to preset station number
1 (P01). To tune to the next or previous preset station, press FOLD/10/MEM +/- button.