GOGpaintball.com
FIG. 1
FIG. 2
BARREL BLOCKER IN USE
USE HIGH PERFORMANCE LOADER
The Barrel Blocking Device is a critical piece of paintball safety equipment - nearly as important as
paintball goggles. The Barrel Blocker serves to protect against accidental discharge of a paintball by
catching it before it can cause harm. A Barrel Blocker is included with the G-1
TM
and must be used every
time it is handled in an area where people or property are not properly protected by paintball goggles
or paintball field netting. To use the Barrel Blocker simply slip it over the end of the barrel and stretch
its cord back over the back of the G-1
TM
or the rearmost part over which it can be securely looped. Use
the strap’s adjuster to cinch the strap tight, so that the Barrel Blocker can provide protection against
accidental discharge of a paintball.
The Barrel Blocker should only be removed when the G-1
TM
is on a “live” paintball field and all
persons
involved are wearing proper paintball protection.
The G-1
TM
is a high performance tournament grade paintball marker. Its low-force bolt will often
prevent paintballs from being chopped if the hopper is not able to load paintballs as fast as the G-1
TM
is
being fired. If you want to realize the
G-1
TM
’s maximum firepower potential, especially if it is upgraded
with a circuit board that utilizes an anti-chop eye for higher rates of fire, you will need to use a high
performance loader. High performance loaders, especially those which provide force-feeding, will yield
the best results with the G-1
TM
.
The G-1
TM
is equipped with a clamping feedneck that allows it to adapt to the small size differences
in hopper neck sizes, yet lock or release quickly. Using a 7/64-inch allen wrench, loosen the clamping
feedneck before installing a hopper. If the hopper is a tight fit, a flat bladed screwdriver may be used to
further spread the gap in the feedneck clamp, provided the clamp screw has been loosened enough.
The G-1
TM
may also be configured so that the hopper is located to the right, left, or directly above the
center of the marker. See the Advanced Maintenance Section of this manual for instructions to change
or reposition the feedneck.
BARREL BLOCKER
HOPPER
BARREL BLOCKER/HOPPER
PLEASE READ CAREFULLY
03