®
PRO-HDBaseT4P
9
PRO-HDBaseT4P-RX
1. Micro-USB:
For technical support only [firmware update]
2. HDMI Signal LED:
Output #1 signal LED indicator
3. HDMI Signal LED:
Output #2 signal LED indicator
4. Power LED:
Power indicator LED
5. Link LED:
Link indicator LED
6. Signal LED:
When receiving unit receive the HDMI signal, the LED light will shine
Front Panel
Rear Panel
5
4
3
2
1
6
Position
If setting
PIN#1
OFF[
]
Reserved
ON[
]
Reserved
PIN#2 PIN#3
OFF[
] OFF[
]
RS-232 normal use
OFF[
]
ON[
]
Reserved
ON[
]
OFF[
]
For system firmware update
ON[
]
ON[
]
For HDBaseT firmware update
1 2 3 4
OFF
ON
7. RJ45:
Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit
8. IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
9. IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
10. RS-232(terminal block format):
The order of RS-232 pin are TX, RX, GND
(from left to right)
11. Dip Switch:
for F/W update
7
8
9
10
11
12
13
12. HDMI OUT #1:
Connects to a HDMI display with HDMI male-male cable
13. HDMI OUT #2:
Connects to a HDMI display with HDMI male-male cable
