®
PRO-HDBaseT4P
6. Panel Description
Front Panel
Rear Panel
1. Power LED:
Power indicator
2. Micro-USB:
For technical support only [firmware update]
3. HDMI Signal LED:
Input, Loopout 1, Loopout 2 (from left to right)
4. Link Receiver LED:
Link LED indicator 1-4
5. HDMI Signal LED at Receiver:
Output signal LED indicator 1-4
6. +12V DC:
Connect to the +12V 7.5A power supply unit
7. EDID Management Rotary control:
7
1
2
6
7
8
9 10
15
11
12
13
14
5
4
3
8. RS-232(terminal block format):
The order of RS-232 pin are TX, RX, GND
(from the left side to the right)
9. IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
MODE 0
Ultra HD(4K2K@60) – 8/10/12bit 3D HDR video & 7.1ch audio
MODE 1
Ultra HD(4K2K@60) – 8/10/12bit 3D HDR video & 2ch audio
MODE 2
Ultra HD(4K2K@30)(4K2K@60 420) – 8/10/12bit 3D HDR video & 7.1ch audio
MODE 3
Ultra HD(4K2K@30)(4K2K@60 420) – 8/10/12bit 3D HDR video & 2ch audio
MODE 4
Full-HD(1080p@60) – 12bit 3D video & 7.1ch audio
MODE 5
Full HD(1080p@60) – 8bit 2D video & 2ch audio
MODE 6
Learning EDID from loopout #1
MODE 7
Auto EDID analysis learning mode
PRO-HDBaseT4P
