6
Figure 2: Receiver (RX)
1. Power LED
On when the Receiver is powered on
2. Link LED
Connection status indicator LED. Refer to Link
Status Indicator on page 8 for details
3. HDMI Out
Connects to your HDMI display
4. Power Jack
Connects to the included power adapter
5. Antenna (x2)
Connects to the included antenna
6. Reset Button
Press and hold down for 5 seconds to reset the RX*
7. Micro USB
Firmware update port
8. IR In
Connects to the included IR receiver cable
1 2
3
4
5
6
7
8
5
*
Note
: TX and RX pairing is required after a reset. See
Pairing Instructions on page 8.
