13
FAQ & Troubleshooting
Q: The Wireless Connection LED is on, but no video
output on the remote display:
A:
1) Check the HDMI source device is powered on.
2) Check the transmitter's HDMI Signal LED is on.
3) Check the HDMI cables for solid connection. Use
different HDMI cables if necessary.
4) Press the Reset button on both the TX and RX.
5) Connect the HDMI source device directly to the
display to see if there is a signal.
Q: Poor video quality:
A:
1) Check the HDMI cables are connected properly.
Use different HDMI cables if necessary.
2 ) Change the angle of the antenna on the transmitter
unit and receiver unit. Generally, the antenna angle
should be positioned as far apart as possible.
3) Adjust the position of transmitter unit and receiver
unit, and make sure they are within the required
signal range.
4) Press the Reset button on the transmitter unit and
receiver unit.
5) Remove other wireless signals and move any
obstacles that are blocking the signal line-of-sight.
6) Decrease the distance between the transmitter
unit and the receiver unit.
