6
Figure 2: Receiver (RX)
1. Reset Button Push the button to reset the receiver
2. RJ45 Input
Connects to the Transmitter's RJ45 Output
port using a CAT5e/6 cable
3. Link LED
Lights up when RJ45 from TX detected
Flashes when RJ45 from TX not detected
4. Power Jack
Connects to the included power adapter
5. HDMI Out
Connects to remote HDMI display
6. IR Input
Connects to the IR receiver extension cable
Hardware Installation
1.
Power off all devices including your HDMI
source and HDMI display(s).
2.
Connect your HDMI source device to the
Transmitter's HDMI Input connector with
an HDMI cable (HDMI cable not included).
3.
Optional: Connect a HDMI display to the
Transmitter's HDMI out connector with an
HDMI cable (HDMI cable not included) for
local monitoring of the HDMI signal.
