7
Hardware Installation
1.
Power off all devices including your HDMI
source and HDMI display(s).
2.
Connect your HDMI source device to the
Transmitter's HDMI In connector with an
HDMI cable (HDMI cable not included).
3.
Optional: Connect a HDMI display to the
Transmitter's HDMI Out connector with an
HDMI cable (HDMI cable not included) for
local monitoring of the HDMI signal.
4.
Optional: Connect the IR Blaster Cable and
IR Receiver Cable. Face the IR eye towards
your device's IR window. This connection
is needed only if you need to control your
HDMI device from the remote location.
Please see the Connection Diagram on page
8 for proper connection.
5.
Plug your CAT cable between the
Transmitter's RJ45 Out and Receiver's RJ45
In.
6.
Connect your HDMI display to the
Receiver's HDMI Out connector with a
HDMI cable (HDMI cable not included).
