7
Hardware Installation
To achieve optimal performance, Cat6 cable is
recommended.
1.
Power off all devices including your HDMI source
and HDMI display.
2.
Connect your HDMI source to the Transmitter's
HDMI In connector.
3.
Optional: Connect the IR Blaster Cable to the
Transmitter's IR Out port. Face the eye towards
your HDMI source device's IR window. This
connection is needed only if you need to control
your HDMI source at the remote location.
4.
Plug your Cat6 cable between the Transmitter's
RJ45 Out and Receiver's RJ45 In.
5.
Connect your HDMI display to the Receiver's
HDMI Out connector with an HDMI cable (HDMI
cable not included).
6.
Optional: Connect the IR Receiver Cable to the
Receiver's IR In port. This connection is needed
only if you need to control your HDMI source at
the remote location.
7.
Plug the included 5V/2A power adapter into the
Transmitter's Power Jack.
8.
Plug the included 5V/1A power adapter into the
Receiver's Power Jack, then plug all power
adapters into reliable power outlets.
9.
Power on your HDMI source device and HDMI
displays. The extender is ready for use.
