4
Product Layout
Figure 1: Transmitter (TX) - Back Panel
Figure 2: Transmitter (TX) - Front Panel
1
Reset
: Press to reset the Transmitter
2
HDMI In
: Connects to the HDMI source device
3
IR Out
: Infrared 3.5mm socket. Plug the IR Blaster
Cable here. See instructions on page 7.
4
RJ45 Out (x4)
: Connects to the Receiver's RJ45 In
using a Cat6 cable
5
Power Jack
: Connect the included 5V/2A power
adapter here
6
Link LED (x4)
: Lights up when RJ45 signal is detected
7
Data LED
: Blinks when data transfer is detected
