7
Hardware Installation
1.
Power off all devices including your HDMI
source and HDMI display(s).
2.
Connect your HDMI source device to the
Transmitter's HDMI In connector with an
HDMI cable (HDMI cable not included).
3.
Optional: Connect an HDMI display to the
Transmitter's HDMI Out connector with an
HDMI cable (HDMI cable not included) for
local monitoring of the HDMI signal.
4.
Optional: Connect the IR Extension cable to
the Transmitter's IR port. Face the IR eye
towards your HDMI device's IR window.
This connection is needed only if you need
to control your HDMI device from the
remote location. See the application
diagram on page 9 for proper cable
connection.
5.
Plug your CAT5e/6 cable between the
Transmitter's RJ45 Out and Receiver's RJ45
In.
6.
Connect your HDMI display to the
Receiver's HDMI Out connector with an
HDMI cable (HDMI cable not included).
