8
Hardware Installation
1.
Power off all devices including your HDMI
source and HDMI display(s).
2.
Connect your HDMI source device to the
Transmitter's HDMI In connector with an
HDMI cable (HDMI cable not included).
3.
Optional: Connect your HDMI display to
the Transmitter's HDMI Out connector with
an HDMI cable (HDMI cable not included)
for local monitoring of the HDMI signal.
4.
Optional: Connect the IR cable to the
Transmitter's IR port. Face the IR eye
towards your HDMI device's IR window.
This connection is needed only if you need
to control your HDMI device from the
remote location. See the application diagram
on page 9 for proper cable connection.
5.
Plug a CAT6 cable between the Transmitter's
RJ45 Out and Receiver's RJ45 In.
6.
Connect your HDMI display to the
Receiver's HDMI Out connector with an
HDMI cable (HDMI cable not included).
