6
7.
EDID Management
:
•
EDID Bypass
: Press the button with a
paper clip or other sharp object to learn the
EDID from the remote display connected to
the Receiver's HDMI Out
•
EDID Copy Tx/3s
: Press and hold the
button down for 3 seconds to copy the EDID
from the local display connected to the
Transmitter's HDMI out
•
Default
: The source device learns EDID
from the TV with the lowest resolution. To
restore default setting, press and hold down
while powering cycling the unit, then
release 6 seconds after power is back on
Receiver RX Front and Rear Panel
1.
HDMI Out
: Connects to your HDMI display
2.
RJ45 In
: Connects to the Transmitter's RJ45
Out using a CAT cable. It supports PoC to
power the Receiver. The orange LED
illuminates when there is a valid HDMI
signal. The Green LED illuminates when
power is applied
