5
Product Layout
Transmitter TX Front and Rear Panel
1.
Reset Button
: Press to reset the TX
2.
RJ45 Out
: Connects to the Receiver's RJ45 In
using a CAT cable
3.
Power/Signal LED
: Blinks when powered
on with no HDMI signal detected, and solid
on when HDMI signal is detected
4.
Power Jack
: Connects to the included power
adapter
5.
HDMI Out
: Connects to an HDMI display
for local monitoring of the remote display
6.
HDMI In
: Connects to your HDMI source
7.
IR In
: Connects to the included IR Receiver
cable to control the remote display device
from the HDMI source location
8.
IR Out
: Connects to the included IR Blaster
cable to control the HDMI source device
from the remote display location
Summary of Contents for HD20Ext-Cas
