goedekers awne92sp Speed Queen, User Manual

Page: 12 / 24

Quick Wash
Wash lightly soiled items on this cycle. The cycle includes a shorter
wash time.
Rinse & Spin
Use to quickly rinse items. The rinse is followed by a high spin.
Spin
Use this cycle to extract water from wet items. The cycle uses the
high spin.
Selections
The following selections can be used to modify the currently chosen
cycle. The default selections will be lit after choosing a cycle.
Temp
Press the Temp keypad to change the cycle’s wash water tempera-
ture from the default selection to Cold, Cool, Warm, or Hot.
Load Size
The Load Size Selection determines the amount of water used in
the cycle.
Choose Small, Medium, Large or Extra Large according to the
amount of laundry being washed.
Soil Level
Changing the Soil Level keypad will add more wash time to the cycle.
Choose Light, Medium, Heavy or Max according to the amount of
soil in the laundry load.
Options
The following options can be used to modify the currently chosen
cycle, signal volume and control lock.
Soak
The Soak option adds a 27 minute soak to the beginning of the cy-
cle. Use for heavily soiled or stained clothing. The washtub will fill
with water, agitate for a reduced period of time, pause for approxi-
mately 27 minutes, and spin out to complete the cycle.
Pre-Wash
The Pre-Wash option adds a second wash to the selected cycle.
Second Rinse
This Option will provide an additional rinse to the selected cycle.
The water temperature will be cold.
Third Rinse
The Third Rinse Option provides two rinses in addition to the selec-
ted cycle. It is useful for detergent sensitive skin, allergies, etc. The
water temperature will be cold.
Delay Start
Pressing the Delay Start Option will allow the cycle to begin up to
24 hours after pressing the keypad. Pressing it once will delay the
cycle by one hour and 1h will show on the control’s display. Press
the Delay Start keypad again to increase the time by one hour each
press. Press the Start/Pause keypad to begin the countdown.
While setting the Delay Start Option, the cycle time and the Delay
Start keypad light will flash (1 second on/off).
After the Delay Start Option is started, the Delay Start keypad
light will flash (1 second on/off).
Signal
Pressing the Signal keypad will change the end of cycle signal vol-
ume. There are four settings: Off, Low, Medium, High.
Control Lock (Secure keypad)
Pressing and holding the Signal keypad for three seconds will turn
on the Control Lock. The Control Lock status light will be lit. While
Control Lock is on, no other keypad presses are allowed. Press and
hold the Signal keypad again to turn the option off.
Status
The Status lights are lit during the cycle to show what part of the
cycle is running.
Wash The Wash status light is lit
during the wash portion of the
cycle including Pre-Wash and
Soak, if selected.
Rinse The Rinse status light is lit
during the rinse portions of
the cycle including Second
Rinse and Third Rinse, if selec-
ted.
Spin The Spin status light is lit
during the final spin portion of
the cycle.
To Wash Clothes
Control Panel
12
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT Part No. 202956R2
www.goedekers.com