DISCLAIMER
*As per tests conducted and certifications received from CSIR-CSIO, an (ICMR) approved laboratory.
**As per theoretical calculations 99.9%. As per lab test reports 99%.
***This data is extracted from the website https://iuva.org/iuva-covid-19-faq. It is meant for
informational purposes only and not intended to replace the care of a medical practitioner. No guarantee
or declaration is given, either explicitly or implicitly, as regards the accuracy or completeness of the
information. Godrej & Boyce Manufacturing Co. Ltd., shall not be liable for any loss or injury caused in
whole or in part whilst interpreting the above information, or for any decision/s and/or action/s taken or
not taken by anyone in reliance of such information.
****The contents & information on the catalogue is for general purposes and is provided on “as is” basis.
All warranties, recommendations & representations of any kind mentioned herein are disclaimed,
including the implied warranties of merchantability and fitness for a particular use. The Company
disclaims any claims, losses, demands, or damages of any kind whatsoever arising out of or resulting by
reason or in consequence of any illegal breaking open of UV Case/ Home / Office Safes, Video Door
Phones, Burglar Alarm Systems, or any theft, fire, robbery, fraud or other wrongful act done by any third
Party with regard to UV Case/ Home / Office Safes, Video Door Phones, Burglar Alarm Systems including
but not limited to direct, indirect, incidental, or consequential loss or damages, compensatory damages,
injury, economic loss, or otherwise resulting from theft, fire, robbery, fraud or other wrongful act done by
any third Party. Images are for reference purposes only, actual colour and look may vary. The specifica
-
tions, prices & features of the products may be changed at the sole discretion of the Company without
prior notice. Manufacturing Tolerance - /- 10% Dime/- 10%. ISO 9001:2015/ISO
14001:2015/ISO 45001:2018.
Products Marketed and Serviced by Godrej & Boyce Mfg. Co. Ltd.
Godrej & Boyce incorporates UV-C based sanitisation technology into personal use devices for
consumers. We strongly advise you to read on the possible effects of UV-C rays/transmissions. If
younhave any questions or doubts about the use of our UV-C products, please carefully read and follow
the instructions on the manual (also available at www.uvcase.godrejsecure.com ) and also be mindful of
the warnings on the labelling on the product. Please ensure that the eyes and other sensitive and
vulnerable and sensitive parts of the body are not inserted in the product since the product is not suitable
to be used on these. Always keep the product while switched on away from children and adults needing
care.
We disclaim any and all liability for any damage arising from the purchase and/or use of the product.
Please use the product only for the purpose stated on the product and for no other purpose. Please do
not disassemble or perform any experimentations or modify the product in any way – Godrej & Boyce
shall not be in any way liable for any consequences of such actions. Always be reminded that the product
must be used with caution and in accordance with the proper use and safety guidelines and precautions
as indicated in the instructions and/or manuals which come together with the purchased product. In
case of any help, guidelines or doubts please contact us on
1800 209 5511.
By confirming your purchase of this product herein offered, you hereby acknowledge and unconditionally
accept the terms and conditions for the use of the product as well as the disclaimers stated herein.
Long press the “SET” button, till the right hand side’s first digit over the display starts to blink. Then,
by using the “^” button change the right hand side’s first digit as per your requirement.
To set the second digit, press the “<” button twice. The second digit over the display will start to blink.
Press the “^” button to change the second digit as per your requirement.
To set the third digit, press “<” button four times. The third digit over the display will start to blink.
Press the “^” button to change the third digit as per your requirement. (Range of time can be set from
a minimum of 180 seconds to a maximum of 999 seconds).
Once all the 3 digits are set, press the “SET” key once or wait for 20 seconds, your customized value
will be displayed. Now, the Godrej UV Case will start working as per the customized time.
