Godrej InsuliCool, User Manual

Page: 6 / 20

INSTALLATION GUIDE
Correct installation is critical for proper functioning of the product.
Installation can be done in 3 simple steps.
Step 1: Inspection of Location and Wall Power Socket
• Installation must be done in a well-ventilated open area, away from
any source of heat (sun rays, heater/oven/gas stove), away from
dusty locations & moist areas. It should not be placed where there is
danger of water falling on to the product & its power adapter.
• Power supply must be in the range of 160V to 230V.
Step 2: Product Placement
• Take the product out of the packaging.
• Keep the product on a hard surface with at least 15cm gap from all
sides for proper air ventilation.
• Place the product in the pre-determined location near the power
source.
• Keep the power adapter 50 cm away from the cooling unit.
• Avoid use of extension board.
Step 3: Making the Product Operational
• Connect the 3 pin power adapter to the wall socket.
• Connect the output pin of the power
adapter into the socket on the unit.
3
For First time usage, Pre-cool the product for 1 hour
before placing any items inside the unit.
• Switch ON the power.
Check for smooth functioning
of the fan and the temperature display.