Godrej GSC 12NTC3-WUA, Owner'S Manual

Page: 16 / 50

FAN
COOL, FAN, DRY, HEAT and AUTO operation
1. When “COOL” mode is set, in accordance with D-Value between indoor room temperature and set
temperature, air conditioner will start or stop the cooling operation. User can change fan speed Low,
Medium, High and Auto as per requirement.
2. When “FAN” mode is set, Set Temperature can't be adjusted, only Fan Speed can be adjust to Low,
Medium and High. In this mode, Compressor will always remain off. Display will show indoor room
temperature.
3. When “DRY” mode is set, in accordance with D-Value between indoor room temperature and set
temperature, air conditioner will start or stop the cooling operation and fan speed will change
automatically to decrease room humidity. Fan speed cannot be changed in DRY mode.
4. When “AUTO” mode is set, in accordance with D-Value between indoor room temperature and set
temperature, air conditioner will start or stop the cooling operation. In this, mode Set temperature
become 24˚C and fan speed become Auto. Set Temperature and Fan speed can't be adjusted.
5. When “E-Saving” mode is set (in cool mode), Set temperature become 24˚C and Fan speed become
Medium. Set Temperature and Fan speed can't be adjusted.
6. When “SLEEP” mode is set (in cool mode), “SL” icon will appear on display for 2sec. Sleep Function
will run as per following logic:
For first hour Set temp maintains
For next 2 hours: Set temp. + 1°C maintains
For next 5 hours: Set temp. + 2°C maintains
After 8 hours Sleep function gets cancelled.
7. “HEAT” mode is not applicable.