Digital Video Recorder: User manual
27
[
Area
] Click setup and enter the set area. The area is divided into PAL22X18. Green block means the current cursor area. Yellow block mean s the
dynamic detect defensive area. Black block means the unfenced area. You can set the area as followed. Drag the mouse and dra w the area.
[
Period
] Trigger the motion detect signal in the set time section. You can set according to week or set uniformly. Each day is divid ed into four
time sections. Means the set valid.
[
Interval
] Only one alarm signal is turned on (even there are several motion detect signals) in the set interval.
[
Delay
] Delay a few moments and stop when the alarm state is turned off. The range is 10-300 seconds.
[
Record channel
] Choose the recording channel (multiple options supportive). Trigger the video signal when the alarm is turned on.
Note: Set in the [recording channel] and perform the linkage recording. Start detecting video files in the corresponding time section.
[
PTZ Activation
] Set the PTZ linkage when the alarm is turned on.
Picture 4.6 set the time section Picture 4.7 PT Z Activation
Note: PTZ linkage is set in the [shortcut menu] > [PTZ control]. Set the tour between spots, trail tour and so on
.
[
Show message
] Pop the alarm information dialog box in the local host computer screen.
[
] Means sending an E-mail to user when the alarm is turned on.
Note: Set in the [network service] and send an E-Mail.
