Godrej Eyetrace Elite ET-8D12, User Manual

Page: 9 / 40

9
3. Basic operation
Note: The button in gray display indicates non-support.
3.1 Turn on
Plug the power supply and turn on the power supply switch. Power supply indicator light indicates „turning on‟ of the video recorder. After the startup you will hear a beep.
The default setting of video output is multiple-window output mode. If the startup time is within the video setting time, the timing video recording function will start up
automatically. Then the corresponding channel is shining and the DVR is working normally.
Note:
1.
Make sure that the input voltage corresponds with the switch of the DVR power supply.
2. Power supply demands: 220V ±10% /50Hz.
3. Suggest using the UPS to protect the power supply under allowable conditions.
3.2 Turn off
There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn off the system] option is called soft switching. Pressing the power
supply switch is called hard switching.
Illumination:

Auto resume after power failure. If the DVR is shut down abnormally, it can automatically backup video and resume previous working status after power
failure.

Replace the hard disk. Before replacing the hard disk, the power supply switch in the rear panel must be turned off.

Replace the battery. Before replacing the battery, the setting information must be saved and the power supply switch in the real panel must be turned off. The
DVR uses button battery. The system time must be checked regularly. If the time is not correct you must replace the battery, we recommend replacing the battery every
year and using the same battery type.
Note: The setting information must be saved before replacing the battery, otherwise, information will be lost.
3.3 Login
When the DVR boots up, the user must login and the system provides the corresponding functions with the user purview. There are two user settings. The names are
'admin' and 'guest'. These names have no password. 'Admin' is the super user purview; and 'Guest' permissions are preview and video playback. User 'admin' and 'guest'
passwords can be revised, while their permissions can‟t be revised.
Password protection: If the password is continuous wrong three times, the alarm will start. If the password is continuous wrong five times, the account will be locked. (The
account can be unlocked through reboot or after half an hour, the account will be unlocked automatically).
For your system security, please modify your password after first login.