24
setup. Self adaption is the trade-off between the image quality precedence and fluency precedence.
Fluency precedence and self-adaption are valid only when the assistant code stream is turned on. Otherwise image quality precedence is valid.
4.4.4 Network service
Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure the parameters.
[
PPPOE setup
]
Input the user name and password that ISP (Internet service provider) provides. After saving it reboot up your system. Then the DVR will build a network connection based
on PPPOE. The IP address will change into dynamic IP address above operation is well done.
Operation: After PPPOE dialing successfully look up the IP address in the [IP address] and obtain the current IP address. Then use this IP address to visit the DVR through
user port.
[
NTP setup
]
The NTP server must be installed in the PC.
Picture 4.19 NTP setup Picture 4.20 EMAIL setup Picture 4.21 IP purview setup
Host computer IP:
Input the IP address installed NTP server.
Port:
Default 123. You can set the port according to NTP server.
Time zone:
London GMT+0, Berlin GMT+1, Cairo GMT+2, Moscow GMT+3, New Delhi GMT+5, Bangkok GMT+7, Hong Kong Beijing GMT+8, Tokyo GMT+9,
Sydney GMT+10, Hawaii GMT-10, Alaska GMT-9, Pacific time GMT-8, American mountain time GMT-7, American mid time GMT-6, American eastern time GMT-5,
Atlantic time GMT-4, Brazil GMT-3, Atlantic mid time GMT-2.
Update cycle:
The same with the NTP server check interval. Default: 10 minutes.
E-mail setup
: If the alarm is turned on or the alarm linkage photos are taken, send an E-mail about the alarm information and the photos to appointed address.
STMP server:
E-mail server address. It could be an IP address or domain name. Domain name can be translated only it is the correct DNS configuration.
Port
:
E-mail server port number.
SSL
:
Decide whether using Secure Socket Layer protocol to login.
User
:
Apply the E-mail server user name.
Password
: Input the password corresponding to the user.
Sender
: Set the E-mail sender address.
Receiver
: Send the E-mail to appointed receivers when the alarm is turned on. You can set three receivers at most.
Theme
: You can set as you wish.
Summary of Contents for Eyetrace Elite ET-8D12
Page 1: ...USER MANUAL ET 8D12 Digital Video Recorder...
Page 40: ...40...
