Digital Video Recorder: User Manual
28
4.4.5 GUI display
【
Channel name
】
■ Click the channel name modify button and enter the channel name menu. Modify the channel name. The 16 Chinese characters
and 25 letters are supportive.
【
Time title
】
■ means the selective state. Display the system data and time in the surveillance window.
【
channel title
】
■ means the selective state. Display the system channel number in the surveillance window.
【
Recording status
】
■ means the selective state. Display the system recording status in the surveillance window.
【
alarm status
】
■ means the selective state. Display the system alarm status in the surveillance window.
【
code stream information
】
■ means the selective state. The ninth window displays the code stream information in the nine-window preview status.
【
transparency
】
■ Choose the background image transparency. The range is 128~255.
【
resolution
】
■
set display resolution.
【
channel
】
■ Choose the set code output channel number.
4.4.6 PTZ setup
[Channel]
Choose the dome camera input channel.
[Protocol]
Choose the corresponding dome protocol, (PELCOD as an example).
[Address]
Set as the corresponding dome address. Default 1. (Note: The address must be consistent with the dome address.)
[Baud rate]
Choose the corresponding dome baud rate length. You can control the PTZ and vidicion. Default: 115200.
[Date bit]
Include 5-8 options. Default: 8.
[Stop bit]
Include 2 options. Default: 1.
[Parity]
Include odd check, even check, sign check, blank check. Default: void.
4.4.7 Tour setup
Set the tour display. Means that the tour mode is turned on. You can choose the single window, four windows, nine windows, sixteen windows tour
display or single display.
[Interval]
Set the tour switch interval. The set range is 5-120 seconds.
Note:
/
means turn off/on the tour.
