Digital Video Recorder: User Manual
28
Picture 4.14 network setup Picture 4.15 code setup Picture4.16 network service Picture 4.17 PPPOE setup
4.4.3 Network setup
[Network card
] You can choose cable network card or wireless network card.
[DHCP enable
] Obtain IP address automatically.
Note
: DHCP server is pre-installed.
[IP address
] Set the subnet mask code. Default: 192.168.1.10.
[Subnet mask code
] Set the subnet mask code. Default: 255.255.255.0.
[Default gateway
] Set the default gateway. Default: 192.168.1.1.
[
DNS setup
] Domain name server, it translates the domain name into IP address. The IP address is offered by network provider. The addre ss must be
set and reboot then it works.
[
TCP port
] Default: 34567.
[HTTP port]
Default: 80.
[
HS download
]: The high speed download option can be enabled.
[
Network transmission strategy
] There are three strategies: self-adaption, image quality, precedence and fluency precedence. The code stream will
adjust according to the setup. Self adaption is the trade-off between the image quality precedence and fluency precedence.
Fluency precedence and self-adaption are valid only when the assistant code stream is turned on. Otherwise image quality precedence is valid.
4.4.4 Network service
Choose the network service option and click the set button to configure the advanced network functions or double click the service button to
configure the parameters.
[
PPPOE setup
]
