Please use powder detergents in such
programmes.
If you encounter problems when using
combined detergents, please contact
the detergent manufacturer.
When you stop using combined
detergents, make sure that water
hardness and rinse aid settings are set to
correct level.
4.10. Rinse-aid usage
Rinse-aid makes dishes sparkle and
helps them to dry without spotting.
Rinse-aid is required for stain-free
utensils and clear glasses.
Use only rinse-aid for domestic
dishwashers.
4.11. Filling the rinse-aid and setting
To fill the rinse aid compartment, open
the rinse-aid compartment cap.
Fill the compartment with rinse aid to the
MAX level and then close the cap.
Be careful not to overfill the rinse aid
compartment and wipe up any spills.
In order to change the rinse aid level,
follow the below steps before turning on
the machine:
Push the programme button and hold it
down.
Turn on the machine.
Hold down the programme button until
the LEDs flash twice. Rinse aid set
follows water hardness set.
The machine will display the current
setting.
Change level by pushing the programme
button.
Switch off the machine to save the
setting.
The factory setting is 4.
If the dishes are not drying properly or are
spotted, increase the level. If blue stains form
on your dishes, decrease the level.
Level
Brightener Dose
Indicator
1
Rinse-aid not
dispensed
r1 is shown on the
display.
2
1 dose is
dispensed
r2 is shown on the
display.
3
2 doses are
dispensed
r3 is shown on the
display.
4
3 doses are
dispensed
r4 is shown on the
display.
5
4 doses are
dispensed
r5 is shown on the
display.
Warning:
Use only those rinse aid materials
which are allowed for use in the machine. As
rinse aid residues left as a result of
overflowing will create extremely high
amounts of foam and thus reduce the
washing performance, remove the excess
amount of rinse aid by wiping it with a rag.
11
