Selecting the Operation Method
Button
CH/OK
GR
MODE
Transmitter:
X1C Operation Method 1(by default
）
TTL/M Mode (In the GR Mode or NON-GR Mode)
Operation
Short press
Double-click
Long press for
2 seconds
Long press for
5 seconds
Short press
Long press for
2 seconds
Short press
Status
Normal
Set the channel
Set the group
Select
Dial
Function
(under normal status)Enter CH settings; (under settings)Confirm and back to
normal status
Control the ON/OFF of modeling flash
Enter C.Fn custom settings
Switch the Operation Methods (Method 1/Method 2)
Select the POWER/FEC settings
Select all the group
(under normal status) Switch the < Group> mode (TTL/M/OFF in the GR mode;
TTL/M/Multi in the NON-GR mode)
Function
Set the < Group>
Adjust the channel amount
Adjust the group’s POWER/FEC amount
- 43 -
- 44 -
Selecting the Operation Method
Multi Mode (In the NON-GR Mode)
Operation
Short press
Double-click
Long press for
2 seconds
Long press for
5 seconds
Short press
Short press
Long press for
2 seconds
Function
(under normal status) Enter CH settings; (under settings) Confirm and back
to normal status
Control the ON/OFF of modeling flash
Enter C.Fn custom settings
Switch the Operation Methods (Method 1/Method 2)
(under PTH status) Set times /frequency hz
(under normal status) Switch the < Group> mode (TTL/M/Multi)
(under PTH status) Back to normal status
Enter PTH status (T-times, and H-hz)
Button
CH/OK
GR
MODE
Status
Normal
Set the channel
Set the Group
Set the flash
times
Set the flash
frequency
Function
No (3 groups) /Turning (5 groups) [Note 3]
Adjust the channel amount
Adjust the group’s power amount
Adjust the times amount
Adjust the frequency amount
Select
Dial
