Wireless Control
(433MHz wireless & smartphone APP through Bluetooth)
Setting color temperature range
The factory setting of remote
control's color temperature range
is 2500-10000K.
In order to use remote control
conveniently, color temperature
range settings are added: when
the remote control is off, hold down
the SET button and turn it on to
enter color temperature adjusting
interface. Press CH/GR button to
switch the lowest and highest color
temperature value and press "-" or
"+" button to change the value.
Press the SET button to confirm it.
Technical Data
FCC Statement
1. With 433 MHz wireless system, VL series have remote grouping and control function. Up
to 6 groups of LED lights can be controlled. 16 channels are available with strong anti-
interference capability. Please set the channels and groups of LED light to the same as
those of RC-A5II remote control before usage.
Adjusting Channel/Group of the Controller
● Press the GR/CH button and the channel icon blinks. Turn the select dial for light
brightness
to choose a channel ID (1 to 16).
● Press the GR/CH button twice and the group icon blinks. Turn the select dial for light
brightness or color temperature to choose a group ID (A to F).
Adjusting Channel/Group of the Remote Control
● Press the CH/GRP button and the group icon blinks. Press the “-” or “+” button to choose a
group ID (A to F).
● Press the CH/GRP button twice and the channel icon blinks. Press the “-” or “+” button to
choose a channel ID (1 to 16).
Adjusting Light Brightness with the Remote Control
● Press the “-” or “+” button to adjust the light brightness.
Note:
The wireless signal can be received only when the controller is power on.
Remote control is available separately.
蓝牙
主页
3965
E965
4659
其他设备
清除设备
12:00
3893
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
VL Series LED Light
Power
Supply
Power
Color Temperature
100% Light
Brightness
(LUX, 1m)(≈)
CRI (≈)
TLCI (≈)
Light Brightness Range
Operation Temperature
Channel
Group
BT Frequency Range
Max. Transmitting Power
Dimension
Net Weight
VL150
AC100V-240V(50/60HZ)
/2A(DC16.8V 10A)
V-port battery(separately sold)
150W
5600±200K
61000
6400
96
95
0%-100%
-10°C~40°C
16
6 groups (A, B, C, D, E, F)
2402.0-2480.0MHz
5dbm
30x14x18cm
Light: 1.97Kg
Controller: 0.86Kg
Adapter: 0.72Kg
VL200
AC100V-240V(50/60HZ)
/3.9A(DC33V 7A)
200W
75000
7800
30x14x18cm
Light: 2.23Kg
Controller: 1.19Kg
Adapter: 0.96Kg
VL300
AC100V-240V(50/60HZ)
/4.3A(DC33V 10A)
300W
77000
10800
34x14x18cm
Light: 2.64Kg
Controller: 1.26Kg
Adapter: 1.14Kg
DC Power
supply
Lithium battery
Note:
The illumination value will be different when changing different accessories.
Bare Light
Included
Reflector