1. Firstly, plug the two ends of
connect cord separately into
the controller’s output control
port and the light’s power input
socket. A “click” will be heard
once finished.
2. Plug the output end of adapter’s connect cord into
controller’s power input end.
3. Use the power cord to connect the power supply.
LCD Panel
LED video light *1
Included Items
Power Supply
Operation
Reflector for Bowens
mount LED light *1
Lamp cover *1
Power cord *1
Power Switch
Control Panel
Group/Channel
Button
Select Dial for
Light Brightness
Bluetooth
Antenna
433MHz Antenna
Battery
Compartment
Power Input
Output
Control Port
Thermovent 1
Thermovent 2
Battery
Compartment
Portable bag *1
Adapter *1
Controller *1
Connect cord *1
GR/CH
BRIGHTNESS
GR/CH
BRIGHTNESS
BRIGHTNESS
1. Power on/off:
long press the Power Switch of controller to
power the LED light on or off.
2. Choose group/channel:
press GR/CH button for once, and
turn the Select Dial for Light Brightness to change the channel
value. Then, press GR/CH button again, and turn the Select Dial
for Light Brightness to change the group value (the group figure will
be displayed recurrently). Press GR/CH button to exit.
3. Light brightness adjustment:
turn the select dial for light
brightness to change the value from 0% to 100%.
4. Power option:
press the GR/CH button and power the light on
to enter power option mode. Turn the brightness select dial to
choose power from 300, 250 and 200. The power is 300W by
default. Exit from this mode automatically without operation for 5
seconds.
Note:
If using V-port battery, please insert the battery into the LED light and power it
on for usage.
Note:
This function is used for the situation that the battery enter to protection
states and cannot word due to some v-port battery doesn't output the
corresponding power in strong power output. When enter this
mode, the output power of the light can be decreased and the battery can be
loaded instead of being protected (this function only applies to VL300).