Protection Function
1. Over-Temperature Protection
●
To avoid overheating and deteriorating the flash head, there is
over-temperature protection in the system. When continuously
firing for many times, the inner over-temperature protection
function may be activated and make the recycling time slow.
If this occurs, allow a rest time of about 10 minutes, and the flash
unit will then return to normal.
●
When the over-temperature protection is started,
is shown on
the LCD display.
Number of flashes that will activate over-temperature
protection:
2. Other Protections
The system provides real-time protection to secure the device and
your safety. The following lists prompts for your reference:
Number of flashes that will activate over-temperature
protection in high-speed sync triggering mode:
Meaning
A failure occurs on the recycling system so that the
flash cannot fire.
Please restart the flash unit. If the problem still exists,
please send this product to a maintenance center.
The system gets excessive heat. Please allow a rest
time of 10 minutes.
The voltage on two outlets of the flash tube is too high.
Please send this product to a maintenance center.
There are some errors occurred during the upgrading
process. Please using the correct firmware upgrade
method.
Prompts on LCD Panel
E1
E2
E3
E9
Technical Data
- 53 -
- 54 -
Power
Output Level
Number
of Flashes
ZOOM
1/1
1/2
1/4
1/8
1/16
1/32
1/64
1/128
40
50
100
200
300
500
1000
2000
50
60
100
200
300
500
1000
2000
50
60
100
200
300
500
1000
2000
60
75
100
200
300
500
1000
2000
60
75
120
200
300
500
1000
2000
75
100
150
200
300
500
1000
2000
75
100
150
200
300
500
1000
2000
80
100
150
200
300
500
1000
2000
80
100
150
200
300
500
1000
2000
80
100
150
200
300
500
1000
2000
20 24
28 35 50 70 80 105 135 200
1/1
1/2
1/4
1/8
1/16
1/32
1/64
1/128
30
30
34
40
50
50
60
60
20 - 200
Power
Output Level
Number
of Flashes
ZOOM
(mm)
(mm)
V860IIIN
Nikon cameras (i-TTL autoflash)
76Ws
20 to 200mm
• Auto zoom (Flash coverage set automatically
to match the lens focal length and image size)
• Manual zoom
• Swinging/tilting flash head (bounce flash): 0 to 330°
horizontally and -7° to 120° vertically
1/300 to 1/20000 seconds
i-TTL autoflash and manual flash
Manual. FEB: ±3 stops in 1/3 stop increments
(Manual FEC and FEB can be combined.)
With <
FEL
> button or<
*
> button
High-speed sync (up to 1/8000 seconds),
first-curtain sync, and second-curtain sync
Provided (up to 90 times, 100Hz)
Transmitter, Receiver, Off
100m
32 (1~32)
Fired with camera’s depth-of-field preview button
Center: 0.6~10m / 2.0~32.8 feet
Periphery: 0.6~5m / 2.0~16.4 feet
Model
Compatible Cameras
Power (1/1 output)
Flash Coverage
Flash Duration
• Exposure Control
Exposure control system
Flash exposure
compensation (FEC)
FE lock
Sync mode
Multi flash
• Wireless Flash
Wireless flash function
Controllable
Receiver groups
Transmission range
(approx.)
Channels
Modeling flash
• Auto Focus Assist Beam
Effective range (approx.)
ID
01~99
2W
·
LED Modeling Lamp
Power
5300K±200K
Color Temperature
7.2V/2600mAh Li-ion battery
Approx
1.5 seconds. Green LED indicator will light up
when the flash is ready.
Approx. 480
Power off automatically after approx. 90 seconds
of idle operation. (60 minutes if set as Receiver)
Hotshoe, 2.5mm sync line
195*75*59 mm
410g
530g
• Power Supply
Power source
Recycle time
Full power flashes
Power saving
• Sync Triggering Mode
• Dimensions
W x H x D
Weight without battery
Weight with battery
M, A, B, C
A, B, C, D, E (D/E group can be controlled
by X series flash trigger)
Transmitter groups
Guide No.(1/1 output,
200mm)
GN
≈
60 (m ISO100)
2413.0MHz-2465.0MHz
5dbm
2.4G Frequency Range
Max. Transmitting Power
