Godox V1C, User Manual

Page: 33 / 205

33
C.Fn: Setting Custom Functions
The following table lists the available and unavailable custom functions of this flash.
Custom Function
Signs Function Setting No. Setting &
Description
m/ft Distance indicator m m
Ft Feet
AF AF-assist beam ON ON
OFF OFF
STBY Auto sleep setting ON ON
OFF OFF
RX STBY Receiver auto
power off timer 60min 60min
30min 30min
SCAN Scan the spare
channel OFF OFF
START Start to find the
spare channels
CH Channel setting 01~32 Choose channels
from 01-32
ID Wireless ID OFF Off
01-99 Choose any figure
from 01-99
BEEP Beeper ON ON
OFF OFF
LIGHT Backlighting time 12sec Off in 12 sec
OFF Always off
ON Always lighting
LCD LCD contras ratio -3~+3 7 levels
FEB ACL FEB auto cancel ON ON
OFF OFF
TX Transmitter unit
control OFF
ON
1. P ress <MENU> Button until C.Fn menu is displayed. The “Ver x.x” in the top right
corner refers to the software version.
2. Select the custom function No.
•
Turn the Select Dial to select the Custom Function No.
3. Change the Setting.
•
Press Set Button and Setting No. Blinks.
•
Turn the Select Dial to set the desired number. Pressing Set Button will confirm
the settings.
• After you set the Custom Function and press <MENU> button, the camera will be
ready to shoot.