mask
to
.
1
M
CH
S
%
mask
to
.
1
M
CH
S
%
The Buzz Button is used to decide whether there is sound reminder for ready flash after recharging. When the buzz
indicator is displayed on the LCD panel, it means the sound reminder is turned on; if not dislayed, the sound
reminder is turned off.
1. A “
BI
” sound will be heard when it’s fully charged.
2. A “
BI
” sound will be heard when the button and the
select dial echo each other.
mask
to
.
1
M
CH
S
%
mask
sec
to
.
1
speed
Multi
CH
S
%
mask
to
.
1
M
CH
S
%
mask
to
.
1
M
CH
S
%
mask
to
.
1
M
CH
S
%
- 27 -
- 28 -
Optical S1 Secondary Unit Setting
In M manual flash mode, press <
S1/S2
> button so that this flash can function as an Optical S1 secondary flash with
Optical sensor. With this function, the flash will fire synchronously when the main flash fires, the same effect as that
by the use of radio triggers. This helps create multiple lighting effects.
Optical S2 Secondary Unit Setting
Press <
S1/S2
> button so that this flash can also function as an Optical S2 secondary flash with Optical sensor in M
manual flash mode. This is useful when cameras have pre-flash function. With this function, the flash will ignore a
single “preflash” from the main flash and will only fire in response to the second, actual flash from the main unit.
QuickerII has a 150W modeling lamp which offers 5% to 100% light adjustment and 2 long lighting modes.
Modeling Lamp’s ON/OFF and Settings:
1. When the modeling lamp is OFF, short press the Modeling Lamp Button to turn it on;
2. When the modeling lamp is ON, short press the Modeling Lamp Button to setting the light brightness. As the
lighting amount is blinking, turn the Select Dial to choose.
●
Turn off the Modeling Lamp
Long press the Modeling Lamp Button for 2 seconds to turn it off.
●
Choose the Modeling Lamp’s Modes
1. Long press the C.Fn Custom Button for 2 seconds until Fn menu is
displayed.
2. Press the SET Button to choose F4.
3. Turn the Select Dial to choose the Modes:
ON: the modeling lamp will keep this status when triggering;
OFF: the modeling lamp will turn off when triggering;
Modeling Lamp
Slave Trigger Model
Buzz Function
C.Fn Setting Custom Function
Long press the C.Fn Custom
1
Button for 2 seconds until
<
Fn
> menu is displayed.
Press the <
SET
> Button to
2
choose Fn function signs.
Turn the Select Dial to change
3
the settings. Short press the
C.Fn
Custom Button to exit.
Custom
Function
Signs
Function
Setting No.
Settings & Description
Restrictions
F1
Choose high-
speed ash
ON
High-Speed Flash (speed) Mode
OFF
Stable Color Temperature
F2
Delay ash
OFF, 0.01~30S
Trigger as second curtain
M/Multi mode
F3
Mask function
OFF
Mask function is off
M mode
N1
Mask function is on: when setting 2 times’
triggering as a period, the rst triggering will re
a ash.
N2
Mask function is on: when setting 2 times’
triggering as a period, the second triggering will
re a ash.
F4
Modeling lamp
mode
ON
The modeling lamp will not change its status
when triggering.
No
OFF
The modeling lamp will turn off when triggering.
M/Multi mode
mask
sec
to
.
1
speed
Multi
CH
S
%
