15
04
01
07
17
08
20
14
03
10
02
05
06
11
12
16
18
13
19
Body
NAMES OF PARTS
01.
AC Power Socket
11.
Modeling Lamp Indicator
02.
Sync Cord Jack
12.
Buzz Indicator
03.
Power Switch
13.
Slave Triggering Indicator
04.
Modeling Lamp Output Controller
14.
Test Indicator Lamp
05.
Flash Output Controller
15.
Light Sensor
06.
Modeling Lamp Button
16.
Fuse
07.
Sound Button
17.
Wireless Control Port
08.
Slave Model Button
18.
Mounting Bracket
09.
Test Button
19.
Umbrella Input
10.
Digital Display
20.
Direction Adjusting Handle
1.
Sync Cord
2.
Power Cord
3.
Standard Reflector
4.
Lamp Cover
5.
Glass Protection Cover
6. Modeling Lamp
7.
Instruction Manual
Accessories
- 03 -
Separately sold accessories
The product can be used in combination with the following accessories sold
separately, so as to achieve best photography effects:
Godox FT series remote control, Power Inverter, Softbox, Photographic Umbrella,
Light Stand, Barndoor, Snoot, etc
OPERATIONS
Flash Preparation
Power Connection
1. Take down the lamp
cover. Install the modeling
lamp and put on the glass
protection cover and the
standard reflector.
(To uninstall the standard
reflector, press the release
button on the flash head
and turn the standard
reflector counter-clockwise
to take it out, as illustrated
in the picture.)
2. Attach the flash unit onto an appropriate light stand. Adjust the mounting
bracket (18) for a good angle and make sure it is tightened and fixed. Use the
direction adjusting handle (20) to adjust the flash to a desired direction. Umbrella
input (19) is for different photo umbrellas to put in.
Use the power cord to connect the flash to an AC power source and turn on the
power switch (3). The lamp on the power switch turns on, indicating it’s connected.
Modeling Lamp Button (6) controls the modeling lamp status: when modeling
lamp indicator lights up, modeling lamp is on; if not, modeling lamp is off.
Modeling lamp output controller (4) is used for adjusting the power output level of
modeling lamp. Modeling lamp will be off automatically after lighting for 2 hours,
avoiding overheat due to long-time lighting when the user is not nearby.
Modeling Lamp
- 04 -
09
5
4
3
2
1
6
