①
Wind Cap
②
Omnidirectional Lavalier Microphone
③
3.5mm TRS-TRS Audio
Connect Cable (For Camera)
④
3.5mm TRS-TRRS Audio Connect Cable (For
Smartphone)
⑤
USB Type-C Cable
⑥
MoveLink Charging Case
⑦
Hand Strap
⑧
Instruction Manual
⑨
Maintenance
What’s Inside
3. Installation Method
Installation Methods When Attaching to Camera:
Install the receiver onto the camera’ s hotshot and tighten it through the back clip.
Then, connect the receiver with the camera by 3.5mm TRS-TRS audio Connect
cable. Insert the earphone into the earphone’s monitoring port to listen.
MoveLink M1 =TX+RX
①
+
②
+
③
+
④
+
⑤
+
⑧
+
⑨
Omnidirectional
Lavalier Microphone
3.5mm TRS-TRS
Audio Connect Cable
(For Camera)
Wind Cap
USB Type-C
Cable
MoveLink Charging Case
Hand Strap
3.5mm TRS-TRRS
Audio Connect Cable
(For Smartphone)
Instruction Manual
Maintenance
Transmitter LINE IN: audio singles input
Receiver LINE IN: audio singles output
Receiver audio sync receiving port: insert the earphone cable into
monitoring port
Port and Indicator
1. Ports:
Working indicator: the indicator will display green in normal working state.
(1) Transmitter
In standby state, the indicator will be off.
In boot-up state, the indicator will be orange in non-connection, be blue in connec-
tion to A channel and be cyan in connection to AB or B channel.
During the pairing, the indicator will blink in red for two times circularly.
2. Indicator:
(2) Receiver
In standby state, the indicator will be off.
In boot-up state, the indicator will be orange in non-connection, be blue in connec-
tion to A channel and be cyan in connection to AB or B channel.
During the pairing, the indicator will blink in red for two times circularly.
