Transmitter (TX)
1. OLED Display
2. Function Introduction
3. Installation Method
Icon 1: connecting channel. A means connect-
ing to A channel.
Icon 2: connecting state. The icon on the
picture means connected state.
Icon 3: battery level.
Icon 4: recording and silent icon. The icon on
the picture means recording state.
Icon 5: soundbyte indication.
Receiver (RX)
1. 3.5mm Audio Sync Monitoring Port
2. 3.5mm TRS Audio Output Port
3. Power Switch/Switch Volume Setting Button
4. Sound +/-
5. Pairing Button
6. Working Indicator
7.OLED Display
8. USB Type-C Port
Power switch: long press the power switch to power on or off. In the state of
power-on, if there is USB Type-C Cable inserted, long press the power switch
to enter standby state and the charging animation will be displayed. In standby
state, long press the power switch to power on.
Short press the silent button to switch on or off silent mode.
Long press the pairing button to match the receiver. The indicator will light
blue when successfully matched.
Charge the products through USB Type-C port directly. The charging anima-
tion will be displayed in charging.
Functions and Operation
Using built-in microphone:
Install the transmitter on the collar through the back clip, aiming the built-in
microphone towards the sound source direction.
For achieving better invisibility during the usage, it is recommended to fix the back
clip towards the outside.
1
2
3
4
5
2
1
6
4
3
7
8
5
Back Clip
Built-in
Microphone
