GodEngine SkyGW-400 User Manual Download Page 69

Page: 69 / 69

7. Regulation

Regulatory Compliance Notices

Class B Equipment

This equipment has been tested to comply with the limits for a Class B device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by implementing one or more of the following measures:

Reorient or relocate the receiving antenna;

Increase the separation between the equipment and receiver;

Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected;

Consult the dealer or an experienced radio or television technician for help.

Modifications

The FCC requires the user to note that any changes or modifications made to this

device that are not expressly approved may void the users’ authority to operate the

equipment.

Declaration of conformity for products marked with the FCC logo in the United

States only.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference

2. This device must accept any interference received, including interference that

may cause unwanted operation.

Summary of Contents for SkyGW-400






































































Search results

Summary of Contents for SkyGW-400

Reviews:

Related manuals for SkyGW-400

Brands by name

Popular brands

GodEngine SkyGW-400, User Manual

Search results

Summary of Contents for SkyGW-400

Reviews:

Related manuals for SkyGW-400

Brands by name

Popular brands