ENG - 49
ENG
ENG - 48
INSTALLING AND OPERATING YOUR FRIDGE FREEZER
•
The operating voltage for your fridge freezer is 220-240 V at 50Hz..
•
We do not accept responsibility for any damages that occur due to
ungrounded usage.
•
Place your fridge freezer where it will not be exposed to direct sunlight.
•
Your appliance should be at least 50 cm away from stoves, gas ovens
and heater cores, and at least 5 cm away from electrical ovens.
•
Your fridge freezer should never be used outdoors or exposed to rain.
•
When your fridge freezer is placed next to a deep freezer, there should
be at least 2 cm between them to prevent humidity forming on the outer
surface.
•
Do not place anything on your fridge freezer, and install your fridge
freezer in a suitable place so that at least 15 cm of free space is
available above it.
•
Do not place heavy items on the appliance.
•
Use the adjustable front legs to make sure your appliance is level and
stable. You can adjust the legs by turning them in either direction. This
should be done before placing food in the fridge freezer.
•
Before using your fridge freezer, wipe all parts with a solution of warm
water and a teaspoon of sodium bicarbonate, then rinse with clean
water and dry. Place all parts in the fridge after cleaning.
•
Install the plastic distance guide (the part with black vanes at the rear)
by turning it 90° (as shown in the figure) to prevent the condenser from
touching the wall.
DIMENSIONS AND LOCATION OF THE APPLIANCE:
Overall dimensions ¹
H1
mm
1440
W1
mm
540
D1
mm
570
Space required in use ²
H2
mm
1590
W2
mm
640
D2
mm
610
Overall space required in use ³
W3
mm
640
D3
mm
1106,5
