EN
EN - 51
WARNING!
It must be possible to disconnect the appliance from the mains power supply; the plug
must therefore be easily accessible after installation.
Electrical connection
à
Before plugging in, ensure that the voltage and frequency shown on the rating plate
correspond to your domestic power supply. The appliance must be earthed. The power
supply cable plug is provided with a contact for this purpose. If the domestic power
supply socket is not earthed, connect the appliance to a separate earth in compliance
with current regulations, consulting a qualified electrician.
à
The manufacturer declines all responsibility if the above safety precautions are not
observed.This appliance complies with the E.E.C. Directives.
IV. REVERSE DOOR
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
à
Ensure the unit is unplugged and empty.
à
To take the door off, it is necessary to tilt the unit backwards. You should rest
the unit on something solid so that it will not slip during the door reversing process.
à
All parts removed must be saved to do the reinstallation of the door.
à
Do not lay the unit flat as this may damage the coolant system.
à
It’s better that 2 people handle the unit during assembly.
1. Carefully remove the two top hinge cover with a flat
screw driver.
2. Unscrew top hinge and then remove door and place it
on a soft pad to avoid scratch.
Summary of Contents for FSD2170TW8F
Page 83: ...HU HU 83 Megjegyzés ...
Page 84: ...04 12 2020 ...
