Gocycle G2 MotorFork Guide 1.0
© Karbon Kinetics Limited. All Rights Reserved.
6
2.4. Now the
MotorFork Separator
Tool (3177) must be
located in the
MotorGearbox fins as
demonstrated. The
top half of the tool
should align against
the Front Upright.
Note: Before
installing the tool
ensure the lower
component is
unscrewed to its
maximum extent.
Note: This
demonstrates
incorrect alignment
of the tool. It should
not locate against the
Disk.
2.5. Turn the thumb
screw to separate the
Front Hub from the
MotorFork.
