OVERVIEW OF THE COMPONENTS
MAIN COMPONENTS AND STANDARD ACCESSORIES:
1.Output shaft
6.Dough hook
2.Rise knob
7.Beater
3.Speed knob
8.Whisk
4.Power cord
9.Pot cover
5.Mixing bowl
USING THE MIXING BOWL
1.In order to lift the arm, rotate the rise knob clockwise (2) The arm will now move upwards. (FIG1)
2.Place the mixing bowl into its holding device (Step1) and turn the bowl clockwise until it locks into place (Step2). (FIG2)
3.Mount the required utensil (dough hook or beater or whisk) by inserting the top into the output shaft, and turn anti-clock-
wise until it locks into place. (FIG3&FIG4)
4.Now add your ingredients. Do not overfill the machine – the maximum quantity of ingredients is 900g.
5.Lower the arm using the rise knob (2) then add the bowl cover to the bowl until it locks into place (FIG5&FIG6)
6.Insert the mains plug into a properly installed 220-240V 50/60 Hz safety power socket.
7.Using the speed button, select a speed between 1 and 8 (corresponding to the mixture).
8.For pulse operation (kneading at short intervals), turn the switch to the “PULSE” position. The switch must be held in this
position for the desired time. When the switch is released it returns automatically to the “0” position.
9.After kneading/stirring, turn the speed knob “5” back to the “0” position as soon as the mixture has formed a ball. Then
remove the mains plug.
10.Push the rise knob (2) downwards and the arm will be raised.
11.The mixture can now be released with the help of a spatula and removed from the mixing bowl.
12.The mixing bowl can now be removed.
13.Clean the parts as described under “Cleaning” (below).
2
